doubao_chat/apps/wifi_camera/board/wl82/board_config.h

54 lines
2.5 KiB
C
Raw Permalink Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

#ifndef BOARD_CONFIG_H
#define BOARD_CONFIG_H
/*********************************************************************************************************************
* 用户:芯片和板子型号配置 *
**********************************************************************************************************************
* 注意:芯片0M-sdram使用说明如下: *
* 使用到lwip库则需要更换lwip_xxx_sfc.a,wifi库需使用wl_xxx_sfc.a,加上CONFIG_NO_SDRAM_ENABLE,删除CONFIG_UI_ENABLE *
* 方法如下: *
* (1)windows使用codeblock的cbp工程文件,则在工程#define选项加上CONFIG_NO_SDRAM_ENABLE,同时删除CONFIG_UI_ENABLE, *
* 另外在linker settings选项把wifi和lwip库换带lwip_xxx_sfc.a和wl_xxx_sfc.a库 *
* (2)linux使用makefile,则在app_cfg.mk打开CONFIG_NO_SDRAM_ENABLE = y,CONFIG_UI_ENABLE = n *
*********************************************************************************************************************/
//芯片型号
// #define CONFIG_BOARD_7911BA // 2M-sdram,外置flash
// #define CONFIG_BOARD_7911BB // 8M-sdram,外置flash
// #define CONFIG_BOARD_7911B0 // 0M-sdram,外置flash
// #define CONFIG_BOARD_7911B8 // 0M-sdram,内置1M-flash
// #define CONFIG_BOARD_7912AB // 8M-sdram,外置flash
// #define CONFIG_BOARD_7913A0 // 0M-sdram,外置flash
// #define CONFIG_BOARD_7913A6 // 2M-sdram,内置2M-flash
// #define CONFIG_BOARD_7915AA // 2M-sdram,外置flash
// #define CONFIG_BOARD_7915B6A // 8M-sdram,内置2M-flash
#define CONFIG_BOARD_7916AB // 8M-sdram,外置flash
//板子型号
// #define CONFIG_BOARD_DEVELOP // 开发板
#define CONFIG_BOARD_DEV_KIT // 开源版
//芯片型号sdram和flash配置文件
#include "board_7911B_cfg.h"
#include "board_7912A_cfg.h"
#include "board_7913A_cfg.h"
#include "board_7915A_cfg.h"
#include "board_7915B_cfg.h"
#include "board_7916A_cfg.h"
//不同板子外设配置文件,如有新的板子,在这里同理添加
#include "board_dev_kit_cfg.h" //开源版
#include "board_develop_cfg.h" //开发板
#if (__SDRAM_SIZE__ == 0)
#ifndef CONFIG_NO_SDRAM_ENABLE
#define CONFIG_NO_SDRAM_ENABLE
#endif
#endif
#endif