#ifndef __WIFI_DEV_H__ #define __WIFI_DEV_H__ #include "sdio/sdio_host_init.h" #include "wifi_connect.h"//wireless_ext //#include "lwip.h"//不能加这里会导致编译错误 struct wifi_platform_data { enum WIFI_MODULE module; u32 sdio_parm; int wakeup_port; int cs_port; int power_port; }; /* static int wifi_ioctl(struct device *device, int cmd, int parm)*/ /* *device :设备句柄 *cmd :例如(DEV_AP_MODE)命令 *parm :使用cfg_info结构,设置类的命令填充cfg_info参数如下表,返回类的命令，传入cfg_info结构 *return : 0 成功 -1 失败 * */ /* cfg_info结构设置参数及返回参数 |类型 |设置参数 |返回参数 | |DEV_AP_MODE |mode,ssid,pwd |mode,ssid,pwd | |DEV_STA_MODE |mode,ssid,pwd |mode,ssid,pwd | |DEV_SMP_MODE |未实现 |未实现 | |DEV_P2P_MODE |mode,p2p_role |未实现 | |DEV_P2P_MODE_CHANGE |p2p_role |未实现 | |DEV_NET_SCANF |NULL |NULL | |DEV_SET_AP_CONFIG |ap_config_table |ap_config_table | |DEV_GET_MAC |parm传入char指针 |parm传入char指针 | |DEV_SET_DEFAULT_MODE |mode,ssid,pwd,force |null | |DEV_SAVE_DEFAULT_MODE |mode,ssid,pwd,force |null | |DEV_CHANGE_SAVING_MODE |mode,ssid,pwd |mode,ssid,pwd | |DEV_SET_CB_FUNC |cb,net_priv |cb,net_priv | |DEV_NETWORK_START |NULL |NULL | |DEV_NETWORK_STOP |NULL |NULL | |DEV_SET_WIFI_CS |port_status |port_status | |DEV_SET_WIFI_WKUP |port_status |port_status | |DEV_SET_WIFI_POWER |port_status |port_status | |DEV_STA_STATUS | |sta_status | |DEV_GET_DEFAULT_WIFI_INFO | |mode,ssid,pwd | |DEV_GET_CUR_WIFI_INFO |mode |mode,ssid,pwd | |DEV_GET_CUR_STA_SSID_INFO | |sta_ssid_info,sta_ssid_num | |DEV_SET_LAN_SETTING | lan_setting | 0 | |DEV_SET_WIFI_POWER_SAVE |NULL |NULL | |DEV_SET_WIFI_TX_PWR_LMT_ENABLE |tx_pwr_lmt_enable|NULL | |DEV_SET_WIFI_TX_PWR_BY_RATE |tx_pwr_by_rate |NULL | |DEV_GET_WIFI_CHANNEL | |channel | |DEV_GET_WIFI_SMP_RESULT | |struct smp_cfg_result | |DEV_SET_SMP_CONFIG_TIMEOUT_SEC | |timeout_sec | */ enum { DEV_AP_MODE = 0x0, DEV_STA_MODE, //STA模式,用于连接AP DEV_SMP_MODE, //一键配置 DEV_P2P_MODE, //wifi direct p2p mode DEV_P2P_MODE_CHANGE, //change to GC or GO mode, 要先同步调DEV_P2P_MODE DEV_NET_SCANF, //STA模式请求扫描ssid DEV_SET_AP_CONFIG, DEV_GET_MAC,//获取MAC地址 DEV_SET_MAC,//设置MAC地址 DEV_SET_DEFAULT_MODE,//设置默认模式 DEV_SAVE_DEFAULT_MODE,//保存默认配置，到VM区 DEV_CHANGE_SAVING_MODE,////改变VM区默认配置 DEV_SET_CB_FUNC, //设置回调 DEV_NETWORK_START, DEV_NETWORK_STOP, DEV_SET_WIFI_CS, //设置引脚 DEV_SET_WIFI_WKUP, //设置引脚 DEV_SET_WIFI_POWER, //设置引脚 DEV_STA_STATUS, //获取STA状态 DEV_GET_DEFAULT_WIFI_INFO, //获取默认的WIFI_INFO(出厂设置的WIFI_INFO) DEV_GET_CUR_WIFI_INFO,//获取当前WIFI_INFO DEV_GET_STA_SSID_INFO,//获取扫描到ssid,备注：当STA连接成功时候，调用DEV_GET_STA_SSID_INFO时，先调用DEV_NET_SCANF DEV_SET_LAN_SETTING,//设置无线IP，掩码，网关，DHCP服务器信息 DEV_SET_WIFI_POWER_SAVE, //设置WIFI低功耗模式,有可能降低距离 DEV_SET_WIFI_TX_PWR_LMT_ENABLE, //设置WIFI发送功率限制 0:Disable, 1:Enable, 2: Depend on efuse DEV_SET_WIFI_TX_PWR_BY_RATE, //设置WIFI根据不同datarate打不同power 0:Disable, 1:Enable, 2: Depend on efuse DEV_GET_WIFI_CHANNEL, //获取当前WIFI连接的路由器的信道,通常在 WIFI_EVENT_STA_CONNECT_SUCC 事件获取得到 DEV_WIFI_PM_SUSPEND, //WIFI进入低功耗模式,停止sdio接收和发送数据,等待AP接入唤醒或者调用PM_RESUME唤醒 DEV_WIFI_PM_RESUME, //退出WIFI低功耗模式,恢复到正常模式 DEV_GET_WIFI_SMP_RESULT, // 获取一键配置ssid和pwd DEV_SET_SMP_CONFIG_TIMEOUT_SEC, //设置一键配置超时时间 }; enum { STATIC_IP = 0x0, DHCP_IP = 0x1, }; struct cfg_info { u32 timeout; enum WIFI_MODE mode; char *ssid; char *pwd; char *ap_config_table; int (*cb)(void *, enum WIFI_EVENT, void *); void *net_priv; char force_default_mode; char port_status; char tx_pwr_lmt_enable; char tx_pwr_by_rate; enum wifi_sta_connect_state sta_status; struct netdev_ssid_info *sta_ssid_info; struct smp_cfg_result smp_cfg; u32 sta_ssid_num; void *__lan_setting_info; u32 sta_channel; u8 p2p_role; }; #define WIFI_PLATFORM_DATA_BEGIN(data) \ static const struct wifi_platform_data data = { \ #define WIFI_PLATFORM_DATA_END() \ }; extern const struct device_operations wifi_dev_ops; #endif /*WIFI_DEV_H*/