#include "app_config.h" #include "system/includes.h" #include "device/includes.h" #include "asm/includes.h" #include "server/audio_dev.h" #if TCFG_USB_SLAVE_ENABLE || TCFG_USB_HOST_ENABLE #include "otg.h" #include "usb_host.h" #include "usb_storage.h" #endif // *INDENT-OFF* UART1_PLATFORM_DATA_BEGIN(uart1_data) .baudrate = 115200, .port = PORTUSB_A, .tx_pin = IO_PORT_USB_DPA, .rx_pin = IO_PORT_USB_DMA, .max_continue_recv_cnt = 512, .idle_sys_clk_cnt = 500000, .clk_src = PLL_48M, .flags = UART_DEBUG, UART1_PLATFORM_DATA_END(); UART2_PLATFORM_DATA_BEGIN(uart2_data) .baudrate = 1000000, .port = PORT_REMAP, .output_channel = OUTPUT_CHANNEL1, .tx_pin = IO_PORTC_03, .rx_pin = -1, .max_continue_recv_cnt = 1024, .idle_sys_clk_cnt = 500000, .clk_src = PLL_48M, .flags = UART_DEBUG, UART2_PLATFORM_DATA_END(); #if TCFG_SD0_ENABLE //sd0 #define SD_PLATFORM_DATA_BEGIN() SD0_PLATFORM_DATA_BEGIN(sd0_data) #define SD_PLATFORM_DATA_END() SD0_PLATFORM_DATA_END() #define SD_CLK_DETECT_FUNC sdmmc_0_clk_detect #elif TCFG_SD1_ENABLE //sd1 #define SD_PLATFORM_DATA_BEGIN() SD1_PLATFORM_DATA_BEGIN(sd1_data) #define SD_PLATFORM_DATA_END() SD1_PLATFORM_DATA_END() #define SD_CLK_DETECT_FUNC sdmmc_1_clk_detect #endif #if TCFG_SD0_ENABLE || TCFG_SD1_ENABLE SD_PLATFORM_DATA_BEGIN() .port = TCFG_SD_PORTS, .priority = 3, .data_width = TCFG_SD_DAT_WIDTH, .speed = TCFG_SD_CLK, .detect_mode = TCFG_SD_DET_MODE, #if (TCFG_SD_DET_MODE == SD_CLK_DECT) .detect_func = SD_CLK_DETECT_FUNC, #elif (TCFG_SD_DET_MODE == SD_IO_DECT) .detect_func = sdmmc_0_io_detect, #else .detect_func = NULL, #endif #if TCFG_SD_POWER_ENABLE .power = sd_set_power, #endif SD_PLATFORM_DATA_END() #endif #if TCFG_IRKEY_ENABLE const struct irkey_platform_data irkey_data = { .enable = 1, .port = IO_PORTA_07, }; #endif #if TCFG_ADKEY_ENABLE #define ADKEY_UPLOAD_R 22 #define ADC_VDDIO (0x3FF) #define ADC_09 (0x3FF) #define ADC_08 (0x3FF) #define ADC_07 (0x3FF) #define ADC_06 (0x3FF) #define ADC_05 (0x3FF) #define ADC_04 (0x3FF) #define ADC_03 (0x3FF * 15 / (15 + ADKEY_UPLOAD_R)) #define ADC_02 (0x3FF * 10 / (10 + ADKEY_UPLOAD_R)) #define ADC_01 (0x3FF * 33 / (33 + ADKEY_UPLOAD_R * 10)) #define ADC_00 (0) #define ADKEY_V_9 ((ADC_09 + ADC_VDDIO)/2) #define ADKEY_V_8 ((ADC_08 + ADC_09)/2) #define ADKEY_V_7 ((ADC_07 + ADC_08)/2) #define ADKEY_V_6 ((ADC_06 + ADC_07)/2) #define ADKEY_V_5 ((ADC_05 + ADC_06)/2) #define ADKEY_V_4 ((ADC_04 + ADC_05)/2) #define ADKEY_V_3 ((ADC_03 + ADC_04)/2) #define ADKEY_V_2 ((ADC_02 + ADC_03)/2) #define ADKEY_V_1 ((ADC_01 + ADC_02)/2) #define ADKEY_V_0 ((ADC_00 + ADC_01)/2) const struct adkey_platform_data adkey_data = { .enable = 1, .adkey_pin = IO_PORTB_01, .extern_up_en = 1, .ad_channel = 3, .ad_value = { ADKEY_V_0, ADKEY_V_1, ADKEY_V_2, ADKEY_V_3, ADKEY_V_4, ADKEY_V_5, ADKEY_V_6, ADKEY_V_7, ADKEY_V_8, ADKEY_V_9, }, .key_value = { KEY_OK, KEY_VOLUME_INC, KEY_VOLUME_DEC, KEY_MODE, NO_KEY, NO_KEY, NO_KEY, NO_KEY, NO_KEY, NO_KEY, }, }; #endif static const struct dac_platform_data dac_data = { .pa_auto_mute = 1, .pa_mute_port = 0xff, //功放的mute脚 .pa_mute_value = 0, //0低电平mute，高电平mute .differ_output = 1, //选择是否采用差分输出模式 .hw_channel = 0x03, //BIT(0)使用DACL | BIT(1)使用DACR .ch_num = 1, //差分只需开一个通道 .vcm_init_delay_ms = 1000, #ifdef CONFIG_DEC_ANALOG_VOLUME_ENABLE .fade_enable = 1, //模拟音量淡入淡出功能 .fade_delay_ms = 40, //每级模拟音量延时40ms调整 #endif }; static const struct adc_platform_data adc_data = { .mic_channel = LADC_CH_MIC1_P | LADC_CH_MIC3_P, //P代表硬件MIC直接正端，N代表硬件MIC只接负端，P_N代表硬件MIC采用差分接法 .linein_channel = LADC_CH_AUX0 | LADC_CH_AUX2, .mic_ch_num = 2, //整个代码运行过程中会用到多少路通道AUDIO MIC .linein_ch_num = 2, //整个代码运行过程中会用到多少路通道AUDIO LINEIN .all_channel_open = 1, //四路全开，默认打开 .isel = 2, //电流档位选择，勿改动 .dump_num = 480, //丢弃刚打开硬件时的数据点数 }; static const struct iis_platform_data iis0_data = { .channel_in = BIT(1), //通道1设为输出 .channel_out = BIT(0), //通道0设为输出 .port_sel = IIS_PORTC, .data_width = 0, //BIT(x)代表通道x使用24bit模式 .mclk_output = 0, //1:输出mclk 0:不输出mclk .slave_mode = 0, //1:从机模式 0:主机模式 .dump_points_num = 320, //丢弃刚打开硬件时的数据点数 }; static void plnk0_port_remap_cb(void) { //重映射PDM DAT-PH0 PDM CLK-PH1 extern int gpio_plnk_rx_input(u32 gpio, u8 index, u8 data_sel); gpio_plnk_rx_input(IO_PORTH_00, 0, 0); gpio_output_channle(IO_PORTH_01, CH0_PLNK0_SCLK_OUT); //SCLK0使用outputchannel0 JL_IOMAP->CON3 |= BIT(18); } static void plnk0_port_unremap_cb(void) { JL_IOMAP->CON3 &= ~BIT(18); gpio_clear_output_channle(IO_PORTH_01, CH0_PLNK0_SCLK_OUT); gpio_set_die(IO_PORTH_00, 0); } //plnk的时钟和数据引脚都采用重映射的使用例子 static const struct plnk_platform_data plnk0_data = { .hw_channel = PLNK_CH_MIC_L, //使用DAT0输入 .clk_out = 1, //使能时钟输出 .port_remap_cb = plnk0_port_remap_cb, .port_unremap_cb = plnk0_port_unremap_cb, .sample_edge = 0, //在CLK的下降沿采样左MIC .share_data_io = 1, //两个数字MIC共用一个DAT脚 .high_gain = 1, //满增益输出 .dc_cancelling_filter = 14, //直流滤波器 .dump_points_num = 640, //丢弃刚打开硬件时的数据点数 }; static const struct spdif_platform_data spdif_data = { .spdif_port = SPDIF_IN_PORT_D, .width = 16, .width_24_to_16 = 0, }; static const struct audio_pf_data audio_pf_d = { .adc_pf_data = &adc_data, .dac_pf_data = &dac_data, .iis0_pf_data = &iis0_data, .plnk0_pf_data = &plnk0_data, .spdif_pf_data = &spdif_data, }; static const struct audio_platform_data audio_data = { .private_data = (void *)&audio_pf_d, }; #if TCFG_USB_SLAVE_ENABLE || TCFG_USB_HOST_ENABLE static const struct otg_dev_data otg_data = { .usb_dev_en = 0x03, #if TCFG_USB_SLAVE_ENABLE .slave_online_cnt = 10, .slave_offline_cnt = 10, #endif #if TCFG_USB_HOST_ENABLE .host_online_cnt = 10, .host_offline_cnt = 10, #endif .detect_mode = OTG_HOST_MODE | OTG_SLAVE_MODE | OTG_CHARGE_MODE, .detect_time_interval = 50, }; #endif #if defined CONFIG_BT_ENABLE || defined CONFIG_WIFI_ENABLE #include "wifi/wifi_connect.h" const struct wifi_calibration_param wifi_calibration_param = { .xosc_l = 0xb,// 调节左晶振电容 .xosc_r = 0xb,// 调节右晶振电容 .pa_trim_data ={1, 7, 4, 7, 11, 1, 7},// 根据MP测试生成PA TRIM值 .mcs_dgain ={ 50,//11B_1M 50,//11B_2.2M 50,//11B_5.5M 50,//11B_11M 72,//11G_6M 72,//11G_9M 85,//11G_12M 80,//11G_18M 64,//11G_24M 64,//11G_36M 62,//11G_48M 52,//11G_54M 72,//11N_MCS0 90,//11N_MCS1 80,//11N_MCS2 64,//11N_MCS3 64,//11N_MCS4 64,//11N_MCS5 50,//11N_MCS6 43,//11N_MCS7 } }; #endif const struct rtc_init_config rtc_init_data = { .rtc_clk_sel = RTC_CLK_SEL_INSIDE, .rtc_power_sel = RTCVDD_SUPPLY_OUTSIDE, }; /************************** LOW POWER config ****************************/ static const struct low_power_param power_param = { .config = TCFG_LOWPOWER_LOWPOWER_SEL, .btosc_disable = TCFG_LOWPOWER_BTOSC_DISABLE, //进入低功耗时BTOSC是否保持 .vddiom_lev = TCFG_LOWPOWER_VDDIOM_LEVEL, //强VDDIO等级,可选：2.2V 2.4V 2.6V 2.8V 3.0V 3.2V 3.4V 3.6V .vddiow_lev = TCFG_LOWPOWER_VDDIOW_LEVEL, //弱VDDIO等级,可选：2.1V 2.4V 2.8V 3.2V .vdc14_dcdc = TRUE, //打开内部1.4VDCDC，关闭则用外部 .vdc14_lev = VDC14_VOL_SEL_LEVEL, //VDD1.4V配置 .sysvdd_lev = SYSVDD_VOL_SEL_LEVEL, //内核、sdram电压配置 .vlvd_enable = TRUE, //TRUE电压复位使能 .vlvd_value = VLVD_SEL_25V, //低电压复位电压值 }; REGISTER_DEVICES(device_table) = { {"uart1", &uart_dev_ops, (void *)&uart1_data }, {"uart2", &uart_dev_ops, (void *)&uart2_data }, {"audio", &audio_dev_ops, (void *)&audio_data }, #if TCFG_SD0_ENABLE { "sd0", &sd_dev_ops, (void *)&sd0_data }, #endif #if TCFG_SD1_ENABLE { "sd1", &sd_dev_ops, (void *)&sd1_data }, #endif #if TCFG_USB_SLAVE_ENABLE || TCFG_USB_HOST_ENABLE { "otg", &usb_dev_ops, (void *)&otg_data}, #endif #if TCFG_UDISK_ENABLE { "udisk0", &mass_storage_ops, NULL }, { "udisk1", &mass_storage_ops, NULL }, #endif {"rtc", &rtc_dev_ops, NULL}, }; #ifdef CONFIG_DEBUG_ENABLE void debug_uart_init() { uart_init(&uart2_data); } #endif void board_early_init() { /* gpio_direction_output(IO_PORTH_07, 1); //PWR控制IO */ dac_early_init(0, dac_data.differ_output ? (dac_data.ch_num > 1 ? 0xf : 0x3): dac_data.hw_channel, 1000); devices_init(); } static void board_power_init(void) { power_init(&power_param); } void board_init() { board_power_init(); rtc_early_init(); #if TCFG_ADKEY_ENABLE adc_init(); key_driver_init(); #endif }