/********************************************************************************************* * Filename : le_server_module.c * Description : * Author : * Email : zh-jieli.com * Last modifiled : 2017-01-17 11:14 * Copyright:(c)JIELI 2011-2016 @ , All Rights Reserved. *********************************************************************************************/ // ***************************************************************************** /* EXAMPLE_START(le_counter): LE Peripheral - Heartbeat Counter over GATT * * @text All newer operating systems provide GATT Client functionality. * The LE Counter examples demonstrates how to specify a minimal GATT Database * with a custom GATT Service and a custom Characteristic that sends periodic * notifications. */ // ***************************************************************************** #include "system/app_core.h" #include "system/includes.h" #include "app_config.h" #include "btstack/btstack_task.h" #include "btstack/bluetooth.h" #include "btcontroller_modules.h" #include "bt_common.h" #include "third_party/common/ble_user.h" #include "le_net_cfg_turing.h" #include "le_common.h" #if (TCFG_BLE_DEMO_SELECT == DEF_BLE_DEMO_NET_CFG_TURING) #if 1 extern void printf_buf(u8 *buf, u32 len); #define log_info printf #define log_info_hexdump printf_buf #else #define log_info(...) #define log_info_hexdump(...) #endif /* #define LOG_TAG_CONST BT_BLE */ /* #define LOG_TAG "[LE_S_DEMO]" */ /* #define LOG_ERROR_ENABLE */ /* #define LOG_DEBUG_ENABLE */ /* #define LOG_INFO_ENABLE */ /* #define LOG_DUMP_ENABLE */ /* #define LOG_CLI_ENABLE */ /* #include "debug.h" */ //------ #define ATT_LOCAL_PAYLOAD_SIZE (64) //note: need >= 20 #define ATT_SEND_CBUF_SIZE (512) //note: need >= 20,缓存大小，可修改 #define ATT_RAM_BUFSIZE (ATT_CTRL_BLOCK_SIZE + ATT_LOCAL_PAYLOAD_SIZE + ATT_SEND_CBUF_SIZE) //note: static u8 att_ram_buffer[ATT_RAM_BUFSIZE] __attribute__((aligned(4))); //--------------- //--------------- #define ADV_INTERVAL_MIN (160) static volatile hci_con_handle_t con_handle; //连接参数设置 static const uint8_t connection_update_enable = 1; ///0--disable, 1--enable static uint8_t connection_update_cnt = 0; // static const struct conn_update_param_t connection_param_table[] = { {16, 24, 10, 600},//11 {12, 28, 10, 600},//3.7 {8, 20, 10, 600}, /* {12, 28, 4, 600},//3.7 */ /* {12, 24, 30, 600},//3.05 */ }; #define CONN_PARAM_TABLE_CNT (sizeof(connection_param_table)/sizeof(struct conn_update_param_t)) // 广播包内容 /* static u8 adv_data[ADV_RSP_PACKET_MAX];//max is 31 */ // scan_rsp 内容 /* static u8 scan_rsp_data[ADV_RSP_PACKET_MAX];//max is 31 */ #if (ATT_RAM_BUFSIZE < 64) #error "adv_data & rsp_data buffer error!!!!!!!!!!!!" #endif #define adv_data &att_ram_buffer[0] #define scan_rsp_data &att_ram_buffer[32] static char gap_device_name[BT_NAME_LEN_MAX]; static u8 gap_device_name_len = 0; static u8 ble_work_state = 0; static u8 adv_ctrl_en; static OS_MUTEX mutex; static void (*app_recieve_callback)(void *priv, void *buf, u16 len) = NULL; static void (*app_ble_state_callback)(void *priv, ble_state_e state) = NULL; static void (*ble_resume_send_wakeup)(void) = NULL; static u32 channel_priv; static int app_send_user_data_check(u16 len); static int app_send_user_data_do(void *priv, u8 *data, u16 len); static int app_send_user_data(u16 handle, const char *data, u16 len, u8 handle_type); static void ble_module_enable(u8 en); extern u8 is_in_config_network_state(void); // Complete Local Name 默认的蓝牙名字 extern const char *bt_get_local_name(); //------------------------------------------------------ extern void turing_ble_cfg_net_result_notify(int succeeded, const char *mac, const char *api_key, const char *deviceid); static const char rsp_cmd[][5] = { {0xA0, 0x01, 0x00, 0x00, 0x5F}, {0xA0, 0x00, 0x01, 0x00, 0x5F}, {0xA0, 0x00, 0x02, 0x00, 0x5E}, {0xA0, 0x00, 0x03, 0x00, 0x5D}, }; static u8 ssid_buf_offset = 0, pwd_buf_offset = 0, openid_buf_offset = 0, complete = 0; static char ssid_buf[32 * 3 + 1]; static char pwd_buf[64 * 3 + 1]; static char openid_buf[33]; static int repeat_timer; static void repeat_send(void *priv) { turing_ble_cfg_net_result_notify(-1, NULL, NULL, NULL); } static void clear_turing_net_cfg_info(void) { complete = 0; ssid_buf_offset = 0; pwd_buf_offset = 0; openid_buf_offset = 0; memset(ssid_buf, 0, sizeof(ssid_buf)); memset(pwd_buf, 0, sizeof(pwd_buf)); memset(openid_buf, 0, sizeof(openid_buf)); } static void send_request_connect_parameter(u8 table_index) { struct conn_update_param_t *param = (void *)&connection_param_table[table_index];//static ram log_info("update_request:-%d-%d-%d-%d-\n", param->interval_min, param->interval_max, param->latency, param->timeout); if (con_handle) { ble_user_cmd_prepare(BLE_CMD_REQ_CONN_PARAM_UPDATE, 2, con_handle, param); } } static void check_connetion_updata_deal(void) { if (connection_update_enable) { if (connection_update_cnt < CONN_PARAM_TABLE_CNT) { send_request_connect_parameter(connection_update_cnt); } } } static void connection_update_complete_success(u8 *packet) { int con_handle, conn_interval, conn_latency, conn_timeout; con_handle = hci_subevent_le_connection_update_complete_get_connection_handle(packet); conn_interval = hci_subevent_le_connection_update_complete_get_conn_interval(packet); conn_latency = hci_subevent_le_connection_update_complete_get_conn_latency(packet); conn_timeout = hci_subevent_le_connection_update_complete_get_supervision_timeout(packet); log_info("conn_interval = %d\n", conn_interval); log_info("conn_latency = %d\n", conn_latency); log_info("conn_timeout = %d\n", conn_timeout); } static void set_ble_work_state(ble_state_e state) { if (state != ble_work_state) { log_info("ble_work_st:%x->%x\n", ble_work_state, state); ble_work_state = state; if (app_ble_state_callback) { app_ble_state_callback((void *)channel_priv, state); } } } static ble_state_e get_ble_work_state(void) { return ble_work_state; } static void cbk_sm_packet_handler(uint8_t packet_type, uint16_t channel, uint8_t *packet, uint16_t size) { sm_just_event_t *event = (void *)packet; u32 tmp32; switch (packet_type) { case HCI_EVENT_PACKET: switch (hci_event_packet_get_type(packet)) { case SM_EVENT_JUST_WORKS_REQUEST: sm_just_works_confirm(sm_event_just_works_request_get_handle(packet)); log_info("Just Works Confirmed.\n"); break; case SM_EVENT_PASSKEY_DISPLAY_NUMBER: log_info_hexdump(packet, size); memcpy(&tmp32, event->data, 4); log_info("Passkey display: %06u.\n", tmp32); break; } break; } } static void can_send_now_wakeup(void) { putchar('E'); if (ble_resume_send_wakeup) { ble_resume_send_wakeup(); } } static const char *const phy_result[] = { "None", "1M", "2M", "Coded", }; static void server_profile_start(u16 con_handle) { ble_user_cmd_prepare(BLE_CMD_ATT_SEND_INIT, 4, con_handle, att_ram_buffer, ATT_RAM_BUFSIZE, ATT_LOCAL_PAYLOAD_SIZE); set_ble_work_state(BLE_ST_CONNECT); /* set_connection_data_phy(CONN_SET_CODED_PHY, CONN_SET_CODED_PHY); */ } /* * @section Packet Handler * * @text The packet handler is used to: * - stop the counter after a disconnect * - send a notification when the requested ATT_EVENT_CAN_SEND_NOW is received */ /* LISTING_START(packetHandler): Packet Handler */ static void cbk_packet_handler(uint8_t packet_type, uint16_t channel, uint8_t *packet, uint16_t size) { int mtu; u32 tmp; u8 status; switch (packet_type) { case HCI_EVENT_PACKET: switch (hci_event_packet_get_type(packet)) { /* case DAEMON_EVENT_HCI_PACKET_SENT: */ /* break; */ case ATT_EVENT_HANDLE_VALUE_INDICATION_COMPLETE: log_info("ATT_EVENT_HANDLE_VALUE_INDICATION_COMPLETE\n"); case ATT_EVENT_CAN_SEND_NOW: can_send_now_wakeup(); break; case HCI_EVENT_LE_META: switch (hci_event_le_meta_get_subevent_code(packet)) { case HCI_SUBEVENT_LE_ENHANCED_CONNECTION_COMPLETE: status = hci_subevent_le_enhanced_connection_complete_get_status(packet); if (status) { log_info("LE_SLAVE CONNECTION FAIL!!! %0x\n", status); set_ble_work_state(BLE_ST_DISCONN); break; } con_handle = hci_subevent_le_enhanced_connection_complete_get_connection_handle(packet); log_info("HCI_SUBEVENT_LE_ENHANCED_CONNECTION_COMPLETE : %0x\n", con_handle); log_info("conn_interval = %d\n", hci_subevent_le_enhanced_connection_complete_get_conn_interval(packet)); log_info("conn_latency = %d\n", hci_subevent_le_enhanced_connection_complete_get_conn_latency(packet)); log_info("conn_timeout = %d\n", hci_subevent_le_enhanced_connection_complete_get_supervision_timeout(packet)); server_profile_start(con_handle); break; case HCI_SUBEVENT_LE_CONNECTION_COMPLETE: con_handle = hci_subevent_le_connection_complete_get_connection_handle(packet); log_info("HCI_SUBEVENT_LE_CONNECTION_COMPLETE: %0x\n", con_handle); connection_update_complete_success(packet + 8); server_profile_start(con_handle); break; case HCI_SUBEVENT_LE_CONNECTION_UPDATE_COMPLETE: connection_update_complete_success(packet); break; case HCI_SUBEVENT_LE_DATA_LENGTH_CHANGE: log_info("APP HCI_SUBEVENT_LE_DATA_LENGTH_CHANGE\n"); /* set_connection_data_phy(CONN_SET_CODED_PHY, CONN_SET_CODED_PHY); */ break; case HCI_SUBEVENT_LE_PHY_UPDATE_COMPLETE: log_info("APP HCI_SUBEVENT_LE_PHY_UPDATE %s\n", hci_event_le_meta_get_phy_update_complete_status(packet) ? "Fail" : "Succ"); log_info("Tx PHY: %s\n", phy_result[hci_event_le_meta_get_phy_update_complete_tx_phy(packet)]); log_info("Rx PHY: %s\n", phy_result[hci_event_le_meta_get_phy_update_complete_rx_phy(packet)]); break; } break; case HCI_EVENT_DISCONNECTION_COMPLETE: log_info("HCI_EVENT_DISCONNECTION_COMPLETE: %0x\n", packet[5]); con_handle = 0; ble_user_cmd_prepare(BLE_CMD_ATT_SEND_INIT, 4, con_handle, 0, 0, 0); set_ble_work_state(BLE_ST_DISCONN); #if !CONFIG_POWER_ON_ENABLE_BLE if (is_in_config_network_state()) { #else { #endif os_mutex_pend(&mutex, 0); bt_ble_adv_enable(1); clear_turing_net_cfg_info(); os_mutex_post(&mutex); } connection_update_cnt = 0; break; case ATT_EVENT_MTU_EXCHANGE_COMPLETE: mtu = att_event_mtu_exchange_complete_get_MTU(packet) - 3; log_info("ATT MTU = %u\n", mtu); ble_user_cmd_prepare(BLE_CMD_ATT_MTU_SIZE, 1, mtu); break; case HCI_EVENT_VENDOR_REMOTE_TEST: log_info("--- HCI_EVENT_VENDOR_REMOTE_TEST\n"); break; case L2CAP_EVENT_CONNECTION_PARAMETER_UPDATE_RESPONSE: tmp = little_endian_read_16(packet, 4); log_info("-update_rsp: %02x\n", tmp); if (tmp) { connection_update_cnt++; log_info("remoter reject!!!\n"); check_connetion_updata_deal(); } else { connection_update_cnt = CONN_PARAM_TABLE_CNT; } break; case HCI_EVENT_ENCRYPTION_CHANGE: log_info("HCI_EVENT_ENCRYPTION_CHANGE= %d\n", packet[2]); break; } break; } } /* LISTING_END */ /* * @section ATT Read * * @text The ATT Server handles all reads to constant data. For dynamic data like the custom characteristic, the registered * att_read_callback is called. To handle long characteristics and long reads, the att_read_callback is first called * with buffer == NULL, to request the total value length. Then it will be called again requesting a chunk of the value. * See Listing attRead. */ /* LISTING_START(attRead): ATT Read */ // ATT Client Read Callback for Dynamic Data // - if buffer == NULL, don't copy data, just return size of value // - if buffer != NULL, copy data and return number bytes copied // @param offset defines start of attribute value static uint16_t att_read_callback(hci_con_handle_t connection_handle, uint16_t att_handle, uint16_t offset, uint8_t *buffer, uint16_t buffer_size) { uint16_t att_value_len = 0; uint16_t handle = att_handle; log_info("read_callback, handle= 0x%04x,buffer= %08x\n", handle, (u32)buffer); switch (handle) { case ATT_CHARACTERISTIC_2A00_01_VALUE_HANDLE: att_value_len = gap_device_name_len; if ((offset >= att_value_len) || (offset + buffer_size) > att_value_len) { break; } if (buffer) { memcpy(buffer, &gap_device_name[offset], buffer_size); att_value_len = buffer_size; log_info("\n------read gap_name: %s \n", gap_device_name); } break; break; case ATT_CHARACTERISTIC_FF02_01_CLIENT_CONFIGURATION_HANDLE: if (buffer) { buffer[0] = att_get_ccc_config(handle); buffer[1] = 0; } att_value_len = 2; break; default: break; } log_info("att_value_len= %d\n", att_value_len); return att_value_len; } /* LISTING_END */ /* * @section ATT Write * * @text The only valid ATT write in this example is to the Client Characteristic Configuration, which configures notification * and indication. If the ATT handle matches the client configuration handle, the new configuration value is stored and used * in the heartbeat handler to decide if a new value should be sent. See Listing attWrite. */ /* LISTING_START(attWrite): ATT Write */ static int att_write_callback(hci_con_handle_t connection_handle, uint16_t att_handle, uint16_t transaction_mode, uint16_t offset, uint8_t *buffer, uint16_t buffer_size) { u16 handle = att_handle; u8 crc8 = 0; log_info("write_callback, handle= 0x%04x,size = %d\n", handle, buffer_size); switch (handle) { case ATT_CHARACTERISTIC_FF02_01_CLIENT_CONFIGURATION_HANDLE: set_ble_work_state(BLE_ST_NOTIFY_IDICATE); check_connetion_updata_deal(); log_info("\n------write ccc:%04x,%02x\n", handle, buffer[0]); att_set_ccc_config(handle, buffer[0]); clear_turing_net_cfg_info(); break; case ATT_CHARACTERISTIC_FF01_01_VALUE_HANDLE: /* printf("\n-ae01_rx(%d):", buffer_size); */ printf_buf(buffer, buffer_size); if (buffer[0] == 0xB0 && buffer[1] == 0x01 && buffer[2] == 0x00 && buffer[3] == 0x00 && buffer[4] == 0x4f) { complete = 0; #if !CONFIG_POWER_ON_ENABLE_BLE ble_module_enable(0); #endif break; } if (buffer[0] != 0xA0) { break; } for (u32 i = 0; i < buffer_size - 1; ++i) { crc8 += buffer[i]; } if (crc8 != (u8)(~buffer[buffer_size - 1]) + 1) { break; } if (buffer[1] == 0x01) { if (buffer[4] && ssid_buf_offset + buffer[4] < sizeof(ssid_buf) - 1) { memcpy(ssid_buf + ssid_buf_offset, &buffer[5], buffer[4]); ssid_buf_offset += buffer[4]; } if (buffer[2] == 0 || buffer[2] == buffer[3]) { complete |= BIT(0); } } if (buffer[1] == 0x02) { if (buffer[4] && pwd_buf_offset + buffer[4] < sizeof(pwd_buf) - 1) { memcpy(pwd_buf + pwd_buf_offset, &buffer[5], buffer[4]); pwd_buf_offset += buffer[4]; } if (buffer[2] == 0 || buffer[2] == buffer[3]) { complete |= BIT(1); } } if (buffer[1] == 0x03) { if (buffer[4] && openid_buf_offset + buffer[4] < sizeof(openid_buf) - 1) { memcpy(openid_buf + openid_buf_offset, &buffer[5], buffer[4]); openid_buf_offset += buffer[4]; } if (buffer[2] == 0 || buffer[2] == buffer[3]) { complete |= BIT(2); } } if (!repeat_timer && complete != 0x07) { repeat_timer = sys_timer_add_to_task("app_core", NULL, repeat_send, 3000); } if (complete == 0x07) { if (repeat_timer) { sys_timer_del(repeat_timer); repeat_timer = 0; } app_send_user_data(ATT_CHARACTERISTIC_FF02_01_VALUE_HANDLE, rsp_cmd[0], 5, ATT_OP_AUTO_READ_CCC); char cfg_buf[256]; snprintf(cfg_buf, sizeof(cfg_buf), "{\"ssid\":\"%s\", \"pass\":\"%s\"}", ssid_buf, pwd_buf); extern int bt_net_config_set_ssid_pwd(const char *data); bt_net_config_set_ssid_pwd(cfg_buf); } break; default: break; } return 0; } static int app_send_user_data(u16 handle, const char *data, u16 len, u8 handle_type) { u32 ret = APP_BLE_NO_ERROR; if (!con_handle) { return APP_BLE_OPERATION_ERROR; } os_mutex_pend(&mutex, 0); if (!att_get_ccc_config(handle + 1)) { log_info("fail,no write ccc!!!,%04x\n", handle + 1); os_mutex_post(&mutex); return APP_BLE_NO_WRITE_CCC; } ret = ble_user_cmd_prepare(BLE_CMD_ATT_SEND_DATA, 4, handle, data, len, handle_type); if (ret == BLE_BUFFER_FULL) { ret = APP_BLE_BUFF_FULL; } os_mutex_post(&mutex); if (ret) { log_info("app_send_fail:%d !!!!!!\n", ret); } return ret; } //------------------------------------------------------ static int make_set_adv_data(void) { u8 offset = 0; u8 *buf = adv_data; offset += make_eir_packet_val(&buf[offset], offset, HCI_EIR_DATATYPE_FLAGS, 0x06, 1); offset += make_eir_packet_val(&buf[offset], offset, HCI_EIR_DATATYPE_MORE_16BIT_SERVICE_UUIDS, 0xFFFF, 2); if (offset > ADV_RSP_PACKET_MAX) { puts("***adv_data overflow!!!!!!\n"); return -1; } log_info("adv_data(%d):", offset); log_info_hexdump(buf, offset); ble_user_cmd_prepare(BLE_CMD_ADV_DATA, 2, offset, buf); return 0; } static int make_set_rsp_data(void) { u8 offset = 0; u8 *buf = scan_rsp_data; u8 name_len = gap_device_name_len; u8 vaild_len = ADV_RSP_PACKET_MAX - (offset + 2); if (name_len > vaild_len) { name_len = vaild_len; } offset += make_eir_packet_data(&buf[offset], offset, HCI_EIR_DATATYPE_COMPLETE_LOCAL_NAME, (void *)gap_device_name, name_len); if (offset > ADV_RSP_PACKET_MAX) { puts("***rsp_data overflow!!!!!!\n"); return -1; } log_info("rsp_data(%d):", offset); log_info_hexdump(buf, offset); ble_user_cmd_prepare(BLE_CMD_RSP_DATA, 2, offset, buf); return 0; } //广播参数设置 static void advertisements_setup_init() { uint8_t adv_type = ADV_IND; uint8_t adv_channel = ADV_CHANNEL_ALL; int ret = 0; ble_user_cmd_prepare(BLE_CMD_ADV_PARAM, 3, ADV_INTERVAL_MIN, adv_type, adv_channel); ret |= make_set_adv_data(); ret |= make_set_rsp_data(); if (ret) { puts("advertisements_setup_init fail !!!!!!\n"); } } #define PASSKEY_ENTER_ENABLE 0 //输入passkey使能，可修改passkey //重设passkey回调函数，在这里可以重新设置passkey //passkey为6个数字组成，十万位、万位。。。。个位 各表示一个数字 高位不够为0 static void reset_passkey_cb(u32 *key) { #if 1 u32 newkey = rand32();//获取随机数 newkey &= 0xfffff; if (newkey > 999999) { newkey = newkey - 999999; //不能大于999999 } *key = newkey; //小于或等于六位数 printf("set new_key= %06u\n", *key); #else *key = 123456; //for debug #endif } extern void reset_PK_cb_register(void (*reset_pk)(u32 *)); void ble_sm_setup_init(io_capability_t io_type, u8 auth_req, uint8_t min_key_size, u8 security_en) { //setup SM: Display only sm_init(); sm_set_io_capabilities(io_type); sm_set_authentication_requirements(auth_req); sm_set_encryption_key_size_range(min_key_size, 16); sm_set_request_security(security_en); sm_event_callback_set(&cbk_sm_packet_handler); if (io_type == IO_CAPABILITY_DISPLAY_ONLY) { reset_PK_cb_register(reset_passkey_cb); } } extern void le_device_db_init(void); void ble_profile_init(void) { printf("ble profile init\n"); le_device_db_init(); #if PASSKEY_ENTER_ENABLE ble_sm_setup_init(IO_CAPABILITY_DISPLAY_ONLY, SM_AUTHREQ_BONDING | SM_AUTHREQ_MITM_PROTECTION, 7, TCFG_BLE_SECURITY_EN); #else ble_sm_setup_init(IO_CAPABILITY_NO_INPUT_NO_OUTPUT, SM_AUTHREQ_BONDING | SM_AUTHREQ_MITM_PROTECTION, 7, TCFG_BLE_SECURITY_EN); #endif /* setup ATT server */ att_server_init(profile_data, att_read_callback, att_write_callback); att_server_register_packet_handler(cbk_packet_handler); /* gatt_client_register_packet_handler(packet_cbk); */ // register for HCI events hci_event_callback_set(&cbk_packet_handler); /* ble_l2cap_register_packet_handler(packet_cbk); */ /* sm_event_packet_handler_register(packet_cbk); */ le_l2cap_register_packet_handler(&cbk_packet_handler); } static int set_adv_enable(void *priv, u32 en) { ble_state_e next_state, cur_state; if (!adv_ctrl_en && en) { return APP_BLE_OPERATION_ERROR; } if (con_handle) { return APP_BLE_OPERATION_ERROR; } if (en) { next_state = BLE_ST_ADV; } else { next_state = BLE_ST_IDLE; } cur_state = get_ble_work_state(); switch (cur_state) { case BLE_ST_ADV: case BLE_ST_IDLE: case BLE_ST_INIT_OK: case BLE_ST_NULL: case BLE_ST_DISCONN: break; default: return APP_BLE_OPERATION_ERROR; break; } if (cur_state == next_state) { return APP_BLE_NO_ERROR; } log_info("adv_en:%d\n", en); set_ble_work_state(next_state); if (en) { advertisements_setup_init(); } ble_user_cmd_prepare(BLE_CMD_ADV_ENABLE, 1, en); return APP_BLE_NO_ERROR; } static int ble_disconnect(void *priv) { if (con_handle) { if (BLE_ST_SEND_DISCONN != get_ble_work_state()) { log_info(">>>ble send disconnect\n"); set_ble_work_state(BLE_ST_SEND_DISCONN); ble_user_cmd_prepare(BLE_CMD_DISCONNECT, 1, con_handle); } else { log_info(">>>ble wait disconnect...\n"); } return APP_BLE_NO_ERROR; } else { return APP_BLE_OPERATION_ERROR; } } static int get_buffer_vaild_len(void *priv) { u32 vaild_len = 0; ble_user_cmd_prepare(BLE_CMD_ATT_VAILD_LEN, 1, &vaild_len); return vaild_len; } static int app_send_user_data_do(void *priv, u8 *data, u16 len) { #if PRINT_DMA_DATA_EN if (len < 128) { log_info("-le_tx(%d):"); log_info_hexdump(data, len); } else { putchar('L'); } #endif return app_send_user_data(ATT_CHARACTERISTIC_FF02_01_VALUE_HANDLE, (const char *)data, len, ATT_OP_AUTO_READ_CCC); } static int app_send_user_data_check(u16 len) { u32 buf_space = get_buffer_vaild_len(0); if (len <= buf_space) { return 1; } return 0; } static int regiest_wakeup_send(void *priv, void *cbk) { ble_resume_send_wakeup = cbk; return APP_BLE_NO_ERROR; } static int regiest_recieve_cbk(void *priv, void *cbk) { channel_priv = (u32)priv; app_recieve_callback = cbk; return APP_BLE_NO_ERROR; } static int regiest_state_cbk(void *priv, void *cbk) { channel_priv = (u32)priv; app_ble_state_callback = cbk; return APP_BLE_NO_ERROR; } void bt_ble_adv_enable(u8 enable) { set_adv_enable(0, enable); } static void ble_module_enable(u8 en) { os_mutex_pend(&mutex, 0); log_info("mode_en:%d\n", en); if (en) { extern u8 get_ble_gatt_role(void); if (1 == get_ble_gatt_role()) { ble_stack_gatt_role(0); // register for HCI events hci_event_callback_set(&cbk_packet_handler); le_l2cap_register_packet_handler(&cbk_packet_handler); } clear_turing_net_cfg_info(); adv_ctrl_en = 1; bt_ble_adv_enable(1); } else { if (complete == 0x07) { os_mutex_post(&mutex); return; } if (repeat_timer) { sys_timer_del(repeat_timer); repeat_timer = 0; } if (con_handle) { adv_ctrl_en = 0; ble_disconnect(NULL); } else { bt_ble_adv_enable(0); adv_ctrl_en = 0; } } os_mutex_post(&mutex); } void bt_ble_init(void) { log_info("***** ble_init******\n"); const char *name_p = bt_get_local_name(); if (!os_mutex_valid(&mutex)) { os_mutex_create(&mutex); } gap_device_name_len = strlen(name_p); if (gap_device_name_len > BT_NAME_LEN_MAX - 1) { gap_device_name_len = BT_NAME_LEN_MAX - 1; } //增加后缀，区分名字 memcpy(gap_device_name, name_p, gap_device_name_len); log_info("ble name(%d): %s \n", gap_device_name_len, gap_device_name); set_ble_work_state(BLE_ST_INIT_OK); ble_module_enable(1); } static void stack_exit(void) { ble_module_enable(0); /* set_ble_work_state(BLE_ST_SEND_STACK_EXIT); */ /* ble_user_cmd_prepare(BLE_CMD_STACK_EXIT, 1, 0); */ /* set_ble_work_state(BLE_ST_STACK_EXIT_COMPLETE); */ } void bt_ble_exit(void) { log_info("***** ble_exit******\n"); stack_exit(); } void ble_app_disconnect(void) { ble_disconnect(NULL); } static const struct ble_server_operation_t mi_ble_operation = { .adv_enable = set_adv_enable, .disconnect = ble_disconnect, .get_buffer_vaild = get_buffer_vaild_len, .send_data = (void *)app_send_user_data_do, .regist_wakeup_send = regiest_wakeup_send, .regist_recieve_cbk = regiest_recieve_cbk, .regist_state_cbk = regiest_state_cbk, }; void ble_get_server_operation_table(struct ble_server_operation_t **interface_pt) { *interface_pt = (void *)&mi_ble_operation; } void turing_ble_cfg_net_result_notify(int succeeded, const char *mac, const char *api_key, const char *deviceid) { char buf[20] = {0}; //6个字节头部 buf[0] = 0xB0; if (succeeded == 1 && mac && api_key && deviceid) { //发送mac数据 buf[1] = 0x01; buf[2] = 0x01; buf[3] = 0x00; buf[4] = 0x01; buf[5] = 0x06; buf[12] = 0; memcpy(&buf[6], mac, 6); for (u32 i = 0; i < 12; ++i) { buf[12] += buf[i]; } buf[12] = (u8)(~buf[12]) + 1; app_send_user_data(ATT_CHARACTERISTIC_FF02_01_VALUE_HANDLE, buf, 13, ATT_OP_AUTO_READ_CCC); //发送api_key数据 buf[1] = 0x01; buf[2] = 0x02; buf[3] = 0x03; buf[4] = 0x01; buf[5] = 0x0D; buf[19] = 0; memcpy(&buf[6], api_key, 13); for (u32 i = 0; i < 19; ++i) { buf[19] += buf[i]; } buf[19] = (u8)(~buf[19]) + 1; app_send_user_data(ATT_CHARACTERISTIC_FF02_01_VALUE_HANDLE, buf, 20, ATT_OP_AUTO_READ_CCC); buf[1] = 0x01; buf[2] = 0x02; buf[3] = 0x03; buf[4] = 0x02; buf[5] = 0x0D; buf[19] = 0; memcpy(&buf[6], &api_key[13], 13); for (u32 i = 0; i < 19; ++i) { buf[19] += buf[i]; } buf[19] = (u8)(~buf[19]) + 1; app_send_user_data(ATT_CHARACTERISTIC_FF02_01_VALUE_HANDLE, buf, 20, ATT_OP_AUTO_READ_CCC); buf[1] = 0x01; buf[2] = 0x02; buf[3] = 0x03; buf[4] = 0x03; buf[5] = 0x06; buf[12] = 0; memcpy(&buf[6], &api_key[26], 6); for (u32 i = 0; i < 12; ++i) { buf[12] += buf[i]; } buf[12] = (u8)(~buf[12]) + 1; app_send_user_data(ATT_CHARACTERISTIC_FF02_01_VALUE_HANDLE, buf, 13, ATT_OP_AUTO_READ_CCC); //发送deviceid数据 buf[1] = 0x01; buf[2] = 0x03; buf[3] = 0x02; buf[4] = 0x01; buf[5] = 0x0D; buf[19] = 0; memcpy(&buf[6], deviceid, 13); for (u32 i = 0; i < 19; ++i) { buf[19] += buf[i]; } buf[19] = (u8)(~buf[19]) + 1; app_send_user_data(ATT_CHARACTERISTIC_FF02_01_VALUE_HANDLE, buf, 20, ATT_OP_AUTO_READ_CCC); buf[1] = 0x01; buf[2] = 0x03; buf[3] = 0x02; buf[4] = 0x02; buf[5] = 0x03; buf[9] = 0; memcpy(&buf[6], &deviceid[13], 3); for (u32 i = 0; i < 9; ++i) { buf[9] += buf[i]; } buf[9] = (u8)(~buf[9]) + 1; app_send_user_data(ATT_CHARACTERISTIC_FF02_01_VALUE_HANDLE, buf, 10, ATT_OP_AUTO_READ_CCC); } else if (succeeded == -1) { //请求重发 if (con_handle) { if ((complete & BIT(0)) == 0) { ssid_buf_offset = 0; memset(ssid_buf, 0, sizeof(ssid_buf)); app_send_user_data(ATT_CHARACTERISTIC_FF02_01_VALUE_HANDLE, rsp_cmd[1], 7, ATT_OP_AUTO_READ_CCC); } if ((complete & BIT(1)) == 0) { pwd_buf_offset = 0; memset(pwd_buf, 0, sizeof(pwd_buf)); app_send_user_data(ATT_CHARACTERISTIC_FF02_01_VALUE_HANDLE, rsp_cmd[2], 7, ATT_OP_AUTO_READ_CCC); } if ((complete & BIT(2)) == 0) { openid_buf_offset = 0; memset(openid_buf, 0, sizeof(openid_buf)); app_send_user_data(ATT_CHARACTERISTIC_FF02_01_VALUE_HANDLE, rsp_cmd[3], 7, ATT_OP_AUTO_READ_CCC); } } } else { buf[6] = 0x50; if (con_handle) { app_send_user_data(ATT_CHARACTERISTIC_FF02_01_VALUE_HANDLE, buf, 7, ATT_OP_AUTO_READ_CCC); } complete = 0; #if !CONFIG_POWER_ON_ENABLE_BLE if (os_mutex_valid(&mutex)) { ble_module_enable(0); } #endif } } const char *turing_ble_cfg_net_get_openid(int *len) { *len = complete == 0x07 ? openid_buf_offset : 0; return openid_buf; } #endif